Operation
Secure Series II LCD Panels User Guide
35
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Color (hue or tint) is the ratio of red to green in the color portion of the image. When Color is decreased, the
image appears redder; when it is increased the image appears greener. To adjust the color, use a blue filter
when viewing the color bar pattern, as you would for adjusting color saturation.
1.
From the Pictures Settings menu, select Color.
2.
Press
▲
or
▼
to adjust the color until the cyan and magenta color bars (on either side of the green
bar) appear to be a single shade of blue.
Like the brightness and contrast controls, the color and tint controls are interactive. A change to one
may require a subtle change to the other to achieve the optimum setting.
Sharpness is the amount of high-frequency detail in the image.
1.
From the Pictures Settings menu, select Sharpness.
2.
On your external test pattern source.
Select a pattern like the one shown below.
3.
Adjust as needed, looking for white edges around the transitions from black to gray and differently-
sized lines in the sweep patterns at the top and bottom. Lower the sharpness setting to eliminate
them.
