Operation
Secure Series II LCD Panels User Guide
45
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
The connector used for the Pluggable Module and the docking board interconnect is based on the JAE
TX24A/TX25A family of plug and receptacle connectors. The JAE connector pins are capable of supporting up
to a maximum current of 1A. The 80-pin right angle blind mate plug connector (P/N: TX25A-80P-LT-H1E) and
its receptacle (P/N: TX24A-80R-LT-H1E) provide interfacing for the following features.
•
Power: DC IN +12V~+19V @ 8A maximum
•
Display Interface: DVI-
D/TMDS† and DisplayPort
•
Audio: Left and Right Channel
•
USB: 3xUSB 2.0 (when USB3.0 is not used) or 2xUSB 2.0 and 1xUSB 3.0
•
UART: Serial communication (Tx and Rx only)
•
Control Signals: Pluggable Module Power Status, Power ON using display panel, Pluggable Board
Detect, Consumer Electronics Control (CEC), and System Fan Control.
•
The connector series image is for reference only.
Left: Plug connector (P/N: TX25A-80P-LT-H1E).
Right: Receptacle connector (P/N: TX24A-80R-LT-H1E).
