manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 8 / 25

Share
Download
Christie RS232 Technical Reference Download Page 8

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

8

020-101547-01 Rev. 1 (03-2015)

CNG–Configure Array

Configures the location of individual tiles using the automatic array configuration information, and 
sets the crop windows of all the tiles.

Commands

DPW–Display Window

Sets the display window of global video source.

Commands

EDD–EDID

Sets Extended Display Identification Data (EDID) timing for DVI inputs.

CCM+MBPC?

Returns the brightness limit for 
Maximum Brightness.

-

CCM+MBPC <value>

Sets the brightness limit for Maximum 
Brightness.

-

CCM+TCLR?

Returns the target gamut/color space for 
the array.
This command is only available if the 
Color Mode is set to FIXED.

-

CCM+TCLR <redx> <redy> 

<greenx> <greeny> <bluex> 

<bluey>

Sets the target gamut/color space for 
the array.
This command is only available if the 
Color Mode is set to FIXED.

-

CCM+ACLR?

Returns the actual color gamut achieved 
on the canvas.

-

Command

Description

Values

CNG 

Automatically configure the array.

-

Command

Description

Values

DPW?

Retrieve the display window of the global video source. -

DPW <x offset> <y offset> 
<width> <height>

Set the display window of the global video source. 
All parameters are from 0 to 1 decimal points.

-

Command

Description

Values

Summary of Contents for RS232


























Reviews:

No comments