manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 13 / 25

Share
Download
Christie RS232 Technical Reference Download Page 13

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

13

020-101547-01 Rev. 1 (03-2015)

 

MLR–Mullion Reduction

Sets the mullion reduction.

Commands

Examples

MMP–Manual Mapping

Configures manually mapped tiles.

Commands

Display all components in the array. 

(LST+ARRY?)

The following information is returned:

Index  Id   xsize   ysize   count

  0     0     1       3       3

Display all neighbors.

(LST+NGBR?)

The following information is returned:

I  A-X,Y   Serial     Left       Bottom     Port0        Port1        Source0    Source1

0  0-0,0 0x0023cf00 0xffffffff 0x0024ccc3 0x0024ccc3-0 0x0023effb-1 0x0000000-0 0x0024e89d

1  0-0,2 0x0023effb 0xffffffff 0xffffffff 0x0024e89d-0 0x0023cf00-1 0x0024e89-d 0x00000000

2  0-0,1 0x0024ccc3 0xffffffff 0x0023effb 0x0023cf00-0 0x00000000-0 0x0024e89-d 0x00000000

Command

Description

Values

MLR?

Returns the current mullion gain and width of the selected MicroTiles.

-

MLR 16 4

Sets the mullion gain to 16 and width to 4 on all MicroTiles.

-

Get the mullion gain and width.

(MLR?)

The following results are displayed:

Index  Serial      Gain   Width

0      0x0023ecf8  16     4

Summary of Contents for RS232


























Reviews:

No comments