manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 10 / 25

Share
Download
Christie RS232 Technical Reference Download Page 10

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

10

020-101547-01 Rev. 1 (03-2015)

Commands

Command

Description

Values

ITP <index>

Enables or disables test patterns.

0 = Off
1 = Grid
2 = Grey Scale 16
3 = Flat White
4 = Flat Grey
5 = Flat Black
6 = Checker
7 = 17 Point
8 = Edge Blend
9 = Color Bars
10 = Multi Color
11 = RGBW Ramp
12 = Horizontal Ramp
13 = Vertical Ramp
14 = Diagonal Ramp
15 = Square Grid
16 = Diagonal Grid
17 = Prism / Convergence
18 = Maximum Activity
19 = FLIR

ITP+GREY <grey 
level>

Defines the shade of grey for the Flat Grey test pattern.  0 to 4095

2048 (Default)

ITP+RMPM <speed>

Defines the motion speed used for the Horizontal Ramp, 
Vertical Ramp, and Diagonal Ramp test patterns.

0 (Default) to 100

ITP+RMPS <slope>

Defines the slope used for the Horizontal Ramp, Vertical 
Ramp, and Diagonal Ramp test patterns.

1 (Default) to 5

ITP+RMPL <grey 
level>

Defines the starting (top/left) grey-level used for the 
Horizontal Ramp, Vertical Ramp, and Diagonal Ramp 
test patterns.
This setting has no effect when the ramp is moving 
(such as ITP+RMPM is non-zero).

0 (Default) to 4095

ITP+GRDP <pitch>

Defines the spacing between lines used for the Square 
Grid and Diagonal Grid test patterns.

2 to 127
32 (Default)

ITP+GRDC <0 | 1>

Enables multi-color or white-on-black grids for the 
Square Grid or Diagonal Grid test patterns.

0 = Multi-color (Default)
1 = White-on-black

ITP+GRDM <0 | 1>

Enables moving or static grid for the Square Grid or 
Diagonal Grid test patterns.

0 = Static (Default)
1 = Moving

Summary of Contents for RS232


























Reviews:

No comments