manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 20 / 25

Share
Download
Christie RS232 Technical Reference Download Page 20

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

20

020-101547-01 Rev. 1 (03-2015)

 

Examples

Command

Description

Values

SAR+LIST

Lists all the subarrays and their 
properties.

SAR+ADD_ <array> <x> 
<y> <width> <height>

Adds a subarray.

array = The number of the array.
x = The x coordinate of the top left 
MicroTiles.
y = The y coordinate of the top left 
MicroTiles.
width = Number of MicroTiles in the 
subarray in the x dimension.
height = Number of MicroTiles in the 
subarray the y dimension.

SAR+AUTO

Automatically configures the subarrays.

SAR+DEL <index>

Deletes a subarray.

index = The number of the subarray.

SAR+DEL_ ALL 

Deletes all the subarrays.

SAR+ENBL <index>

Enables a subarray.

index = The number of the subarray.

SAR+DSBL <index>

Disables a subarray.

index = The number of the subarray.

SAR+DPWN <index> <x> 
<y> <width> <height> 

Sets the display window.

index = The number of the subarray.
x = x offset in decimal points (0.0 -
1.0).
y = y offset in decimal points (0.0 -
1.0).
width = width of the display window in 
decimal points (0.0 – 1.0).
height = height of the display window 
in decimal points (0.0 – 1.0).

SAR+INPT <index> <type> Sets the input selection.

index = The number of the subarray.
type:

• 0 = no video 
• 1 = global video source 
• 2 = local video 
• 3 = either local or global video 

source 

Get a list of subarrays.

(SAR+LIST?)

The following results are displayed:

Index array  x  y width height input enable  xoffset  yoffset  width   height

    0     0  0  0     1      1     2      1  0.00000  0.00000  1.0000  1.0000

Summary of Contents for RS232


























Reviews:

No comments