manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 14 / 25

Share
Download
Christie RS232 Technical Reference Download Page 14

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

14

020-101547-01 Rev. 1 (03-2015)

Examples

NET–Network Setup

Changes the network configuration for the Ethernet port. By default, DHCP support is turned on.
Modifies the network settings of a display. 
Modifies the network setup for this device.
Sets or requests the network setup for this device.

Parameters

• Control Group: Configuration/Preference

• Subclass: Power Down

• Access Level: Admin

Command

Description

Values

MMP+LIST?

Lists all manually mapped tiles.

-

MMP+ADD <index> 
<array> <x> <y>

Adds a manually mapped tile.

<index> = The number of the MicroTile 
in the MicroTiles list

<array> = The index of the array

<x> = The x coordinate

<y> = The y coordinate

MMP+DEL <index>

Deletes a manually mapped tile.

<index> = The number of the manually 
mapped tile

MMP+DEL ALL

Deletes all manually mapped tiles.

Get the list of manually mapped tiles.

(MMP+LIST?)

The following results are displayed:

Index  Serial      Array  X  Y

0      0x0023ecf8  0      0  0

Summary of Contents for RS232


























Reviews:

No comments