RPMA/RPMB/RPMC Series
Installation Instructions
2
NOTE:
RPMA, RPMB, and RPMC models are included in
these installation instructions. Throughout these
instructions "RPMX" is used to designate all of the
models covered by these instructions.
DISCLAIMER
Christie Digital Systems, Inc. and its affiliated corporations and
subsidiaries (collectively "Christie"), intend to make this manual
accurate and complete. However, Christie makes no claim that
the information contained herein covers all details, conditions or
variations, nor does it provide for every possible contingency in
connection with the installation or use of this product. The
information contained in this document is subject to change
without notice or obligation of any kind. Christie makes no
representation of warranty, expressed or implied, regarding the
information contained herein. Christie assumes no
responsibility for accuracy, completeness or sufficiency of the
information contained in this document.
Christie® is a registered trademark of Digital Systems, Inc. All
rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING:
Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the RPMX does not exceed 50 lbs
(22.7 kg).
•
The weight capacity of the RPMX may be LIMITED to
the lowest weight capacity of any other components
located between the RPMX and the supporting
structure!
WARNING:
Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING:
Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING:
Do not use this product outdoors.
IMPORTANT ! :
The RPMX mounts are designed to be:
•
mounted to a 1-1/2" NPT or NPSM threaded extension
column (not included);
•
mounted to a wood framework;
•
mounted to a solid concrete ceiling; or
•
suspended from four threaded rods (not included)
which are secured to a metal framing channel
(spanning a maximum of 5 feet).
--SAVE THESE INSTRUCTIONS--
