Installation and Setup
Mirage M Series User Manual
34
020-101942-02 Rev. 1 (10-2018)
Folded optics
In rear screen applications where space behind the projector is limited, a mirror may be used to
fold the optical path. The position of the projector and mirror must be accurately set. If considering
this type of installation call your dealer for assistance.
Aligning boresight
1. Display the boresight test pattern.
a. Pressing
Test
on the remote keypad or use the built-in keypad and press the soft key
that displays Test on the LCD display.
b. Press the
Up
Arrow
key to cycle to Boresight.
c. Press
Enter
.
2. Focus the image on cross-hair image
I
.
3. Evaluate the focus on cross-hair image
II
and
III
.
If all three images are in focus, no further action is required.
If boresight is required, continue to step 3.
The adjustment screws on the lens mount affect the corresponding cross-hairs on the test
pattern. The cap screw (B) may be under a plastic cap. Remove and retain before adjusting.
http://www.pureglare.com.au
