Installation and Setup
Mirage 4K35 User Manual
37
020-101377-03 Rev. 1 (07-2015)
• Emitter for controlling active shutter glasses
or
A qualified device that mounts in front of the lens of the projector to process the light from the
lens into a passive polarized light. Contact your Immersive dealer for more information.
Software and content requirements
Note the following software and content requirements for stereo 3D applications:
• Any 3D computer software that supports 3D stereo on a supported computer(s) with associated
graphic cards (suggested cards include ATI or NVIDIA)
• A video stream from a video source prepared to be sequential content (for Direct-Input 3D) or
two video streams from a video source that has been prepared to be supplied left eye and right
eye concurrently and frame locked (Dual-Input 3D)
Active stereo 3D configuration
The following diagram shows the typical hardware configuration for active stereo 3D systems:
i
In response to the 3D Sync Out signal from the projector, the IR emitter emits an infrared signal to a
receiver in the active 3D shutter glasses. This synchronizes the active glasses to alternatively open
and close for the active stereo 3D applications.
