Christie LW651i Operating Manual Download Page 83

Page: 83 / 131

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

LIT MAN USR D2

MENU PREFERENCES

Item

Description

AUTO BLANK

Using the ▲/▼ buttons switches the mode for the AUTO BLANK

screen.

BLUE

WHITE

BLACK

• To avoid remaining as an afterimage, displayed image changes

to the designated blank color screen by AUTO BLANK after several

minutes at the following conditions.

- When My Screen or ORIGINAL is displayed as BLANK screen.

- When start-up screen is displayed.

START UP

Using the ▲/▼ buttons switches the mode for the start-up screen.

The start-up screen is a screen displayed when no signal or an

unsuitable signal is detected.

My Screen

ORIGINAL

OFF

My Screen : Screen can be registered by the My Screen item (



ORIGINAL : Screen preset as the standard screen.

OFF : Plain black screen.

• To avoid the image burning into the screen, the START UP screen

changes to the AUTO BLANK screen after several minutes.

• When the ON is selected to the My Screen PASSWORD item in

the SECURITY menu (



102

), the START UP is fixed to My Screen.

(continued on next page)

Summary of Contents for LW651i




































































































































Search results

Summary of Contents for LW651i

Reviews:

Christie LW651i, Operating Manual, Page: 83 / 131

Search results

Summary of Contents for LW651i

Reviews: