manualshive.com logo in svg

Christie LW651i, Operating Manual, Page: 28 / 131

Share
Download
Christie LW651i Operating Manual Download Page 28

27

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

2

LIT MAN USR D2

Setting up

►Do not connect the projector to a power supply while no lens 

unit is attached to it.

►Use extra caution when connecting the power cord, as incorrect or faulty 

connections may result in fire and/or electrical shock.

• Do not touch the power cord with a wet hand.

•  Only use the power cord that came with the projector. If it is damaged, consult 

your dealer to get a new one. Never modify the power cord.

•  Only plug the power cord into an outlet whose voltage is matched to the power 

cord. The power outlet should be close to the projector and easily accessible. 

Remove the power cord for complete separation. 

•  Do not distribute the power supply to multiple devices. Doing so may overload 

the outlet and connectors, loosen the connection, or result in fire, electric shock 

or other accidents.

•  Connect the ground terminal for the AC inlet of this unit to the ground terminal 

of the building using an appropriate power cord (bundled).

• This projector is also designed for IT power systems with a phase-

tophase voltage of 220 to 240 V.

WARNING

NOTICE

Connecting power supply

1.

Put the connector of the power 

cord into the 

AC

 (AC inlet) of 

the projector.

3.

Firmly plug the power cord’s plug into the 

outlet. In a couple of seconds after the power 

supply connection, the 

POWER

 indicator 

lights up in steady orange.

When the DIRECT POWER ON function 

activated, the connection of the power supply 

makes the projector turn on.

AC

Power 

cord

2.

Push the Cord Stopper until it is caught by 

the hook.

Power 
Cord 

Hook

Cord 
Stopper

Summary of Contents for LW651i




































































































































Reviews:

No comments