manualshive.com logo in svg

Christie LW651i, Operating Manual, Page: 111 / 131

Share
Download
Christie LW651i Operating Manual Download Page 111

110

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

2

LIT MAN USR D2

Maintenance

Check and clean the air fi lter periodically. When the indicators or a message 

prompts you to clean the air fi lter, comply with it as soon as possible.

The fi lter unit with two sheets of fi lters is inside of the fi lter cover. The extra air fi lter 

is attached to inner side of the fi lter cover. If one of the fi lters is damaged or heavily 

soiled, replace whole fi lter set with a new one.

Request for a fi lter set with the following type number from your dealer when 

purchasing a new one.

Type number : 003-005339-01 (UX40821)

1.

 

Turn the projector off, and unplug the power 

cord. Allow the projector to suffi ciently cool 

down.

2.

 

Use a vacuum cleaner on and around the 

fi lter cover.

3.

 

Pick and pull up the fi lter cover knobs to 

take it off.

4.

 

 

Press up slightly on the bottom side 

knobs to unlock the bottom side of the 

fi lter unit. Pull the center knob to take the 

fi lter unit off.

5.

 

Use a vacuum cleaner to clean the fi lter 

vent of the projector and the outer side of 

the fi lter unit.

6.

 

 

The fi lter unit consists of two parts. Press 

down around the interlocking parts to 

unlock, then separate the two parts.

7.

 

Use a vacuum cleaner to clean the inner 

side of each part of the fi lter unit to clean 

them up. If the fi lters are damaged or 

heavily soiled, replace them with the new 

ones.

8.

 

Combine the two parts to reassemble the 

fi lter unit.

9.

 

Put the fi lter unit back into the projector.

(continued on next page) 

Filter cover

Filter cover 

knobs

2

3

Filter unit

Filter unit 

knobs

4, 5

6

7

Extra 

air fi lter

Cleaning and replacing the air fi lter

Interlocking

Parts

Summary of Contents for LW651i




































































































































Reviews:

No comments