Christie LW651i Operating Manual Download Page 63

Page: 63 / 131

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

LIT MAN USR D2

IMAGE SETTINGS menu

IMAGE SETTINGS menu

Select an item from the Image Settings menu using

the ▲/▼ cursor buttons, and press the ► cursor

button or

ENTER

button to execute the item. Then

perform it according to the following table.

Item

Description

BRIGHTNESS

Using the ◄/► buttons adjusts the brightness.

Dark

Light

CONTRAST

Using the ◄/► buttons adjusts the contrast.

Weak

Strong

COLOR

Using the ◄/► buttons adjusts the strength of whole color.

Weak

Strong

TINT

Using the ◄/► buttons adjusts the tint.

Reddish

Greenish

SHARPNESS

Using the ◄/► buttons adjusts the sharpness.

Weak

Strong

• There may be some noise and/or the screen may flicker for a

moment when an adjustment is made. This is not a malfunction.

DYNAMIC IRIS

Using the ▲/▼ cursor buttons changes the dynamic iris control

mode.

PRESENTATION

THEATER

OFF

PRESENTATION : The dynamic iris displays the best presentation

image for both bright and dark scenes.

THEATER : The dynamic iris displays the best theater image for

both bright and dark scenes.

OFF : The dynamic iris is always open.

• The screen may flicker when the PRESENTATION or THEATER

modes are selected. If this occurs, select OFF.

(continued on next page)

Summary of Contents for LW651i




































































































































Search results

Summary of Contents for LW651i

Reviews:

Christie LW651i, Operating Manual, Page: 63 / 131

Search results

Summary of Contents for LW651i

Reviews: