manualshive.com logo in svg

Christie LW651i, Operating Manual, Page: 122 / 131

Share
Download
Christie LW651i Operating Manual Download Page 122

121

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

2

LIT MAN USR D2

Resetting all settings

When it is difficult to correct wrong settings, the FACTORY RESET function of 

SERVICE item in OPTION menu (

99

) can reset all settings (except settings 

such as LANGUAGE, AUTO BLANK, LAMP HOURS, FILTER HOURS, FILTER 

MESSAGE, STANDBY MODE, COMMUNICATION, SECURITY and NETWORK) 

to the factory default.

• When the interior portion has become overheated, for safety 

purposes, the projector is automatically shut down, and the indicator lamps 

may also be turned off. In such a case, disconnect the power cord, and wait at 

least 45 minutes. After the projector has sufficiently cooled down, confirm the 

attachment state of the lamp and lamp cover, and turn the power on again.

NOTE

For the 

SECURITY

 indicator, see SECURITY INDICATOR in the SECURITY 

menu (

107

). 

For the 

SHUTTER

 indicator, see the section "

Temporarily shading the screen

" 

(

52

). 

The 

FILTER

 indicator shows the condition of the air filter. Use this feature to keep 

the interior of the projector in good condition.

FILTER indicator

Description

Turned 

off

The air filter is clean. 

 

No need to clean up.

Lighting In 

Orange

The air filter is going to be choked. 

 

Clean the filter. See the section "There is a possibility that the 

interior portion has become heated" (

119

).

Lighting In 

Red

The air filter is choked. 

 

Turn the power off and clean the air filter immediately. See 

the section "There is a possibility that the interior portion has 

become heated" (

119

).

Regarding the indicator lamps

Regarding the indicator lamps (continued)

• The 

FILTER

 indicator might light up in orange or red when something 

blocks the intake vents even though the air filter is clean.

• The

 FILTER

 indicator might light up differently from other indicators or display 

messages related to cleaning the air filter. Follow the prompt that is displayed 

earlier.

NOTE

Summary of Contents for LW651i




































































































































Reviews:

No comments