Downloaded from Projector.com
35
F
rançais
Deutsch
Español
3
Loosen the two screws ( mark)
and lift out the lamp unit.
The screws are not taken off from the lamp unit.
4
Change the lamp unit.
Do not touch the glass inside the unit.
Dirt or fingermarks on the glass may reduce the
brightness of the lamp.
Changing the Lamp
Connector
5
Replace the lamp unit and lamp
cover following the disassembly
procedures in reverse order.
Be sure that the connector of the lamp unit is cor-
rectly connected and the lamp unit is firmly replaced.
6
Insert the power connector into
the power terminal.
7
While pressing the ENTER but-
ton, press the POWER button
three times.
All the monitors flash for a few seconds.
The lamp timer is initialized to [0 hours].
