Downloaded from Projector.com
15
English
Fr
a
n
ç
ais
Deutsch
Espa
ñ
ol
Setting Up
• There are 3 ways of setting the projector up: front projection, overhead projection and rear projection.
• By adjusting the zoom lens, you can choose the screen size as shown below.
Offset (O)
Projection distance (L)
* Offset is the distance from the middle of the projection lens to the bottom edge of the screen.
* “Screen Size (inch)” is the diagonal length of the screen.
* 31-inch screen size is available only for wide screen and the projection distance is 1.4 m.
Adjustment
• Adjust the height of the projector using the 2 adjusters on the front.
• If the relation between the position of the projector and the screen is not correct, the image will be distorted and blurred.
2
When the desired angle is reached,
release the adjustment levers to fix
the adjusters in that position.
3
Turn the adjusters for fine adjustment.
Note
• If you wish to lower the projector to its original position before storing it, press the adjustment levers and slowly lower the
projector. It can then be stored easily.
1
Lift the front of the projector while
pressing the two adjustment levers on
the side of the projector.
Up
Down
40
61
81
1.4 – 1.9
3 – 58
60
91
122
2.1 – 2.8
5 – 87
80
122
163
2.9 – 3.8
6 – 116
100
152
203
3.6 – 4.7
8 – 145
150
229
305
5.4 – 7.1
11 – 217
200
305
406
7.3 – 9.4
15 – 290
250
381
508
9.1 – 11.8
19 – 362
300
457
610
10.9 – 14.1
23 – 434
Screen Size
Screen Size
(inch)
Height
(cm)
Width
(cm)
Projection
distance L
(m)
Offset O
(cm)
Projection distance (L)
Offset (O)
(Front projection)
(Overhead projection)
Adjuster
Adjustment lever
