Downloaded from Projector.com
32
You can adjust and select the following items from the INSTALLATION Menu.
■
Auto Power Up
You can set whether or not the lamp comes on automatically when the
power plug is inserted in the socket.
Select by pressing the and adjustment buttons.
The factory default setting is [Auto].
■
Auto Lamp Off
You can set whether or not the lamp goes off when there is no image input
signal for about 20 minutes.
Select by pressing the and adjustment buttons.
The factory default setting is [On].
■
Remote Control
You can select use of the wireless remote control unit light receivers on the
front and rear of the projector from the following.
1) Rear & Front
The remote control signal can be received from the front and rear.
2) Rear
The remote control signal can be received from the rear only.
3) Front
The remote control signal can be received from the front only.
Select by pressing the and adjustment buttons.
The factory default setting is [Rear & Front].
■
Reverse Mode
You can set vertical or horizontal inversion of the image from the settings
shown on the right.
Select by pressing the and adjustment buttons.
The factory default setting is [Normal].
Setting the INSTALLATION
(Remote Control)
(Reverse Mode)
: Select MENU : Return
Remote Control
Rear & Front
Rear
Front
Rear & Front
Normal
INSTALLATION
Auto Power Up
Auto Lamp Off
Remote Control
Reverse Mode
Auto
Manual
On
Off
: Select
ENTER : Next
: Select MENU : Return
Reverse Mode
Normal
H Invert
V Invert
H/V Invert