Package handling
FHD554-XZ-H and FHD554-XZ-HR Service Guide
8
020-001807-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
•
A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
•
Do not drop the product.
•
Do not apply excessive force to the sides of the bezel when mounting the panel or pushing into
its locked position.
•
Always handle the product on the opposing corners of the bezel to avoid direct contact with the
glass.
•
TIP HAZARD! When shipping a panel, use the provided packing materials and secure to a pallet.
•
When moving the panel, always use the handles. Do not carry the panel by the frame.
Caution! If not avoided, the following could result in minor or moderate injury.
•
Do not tilt the product more than ±15 degrees.
•
Use the handles when moving the shipping package.
•
Do not twist, bend, or tilt the panel.
Notice. If not avoided, the following could result in property damage.
•
Only clean the components with Christie approved products.
To prevent personal injury and to protect the device from damage, read and follow these safety precautions.
Warning! If not avoided, the following could result in death or serious injury.
•
This product must be installed within a restricted access location not accessible by the general
public.
•
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
•
A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
•
A certified electrician must be present during installation to ensure the installation meets the
local electrical code.
•
Install the product near an easily accessible AC receptacle.
•
Hazardous voltages are present at power system inputs. The DC output, though not dangerous
in voltage, has a high short-circuit current capacity that may cause severe burns and electrical
arcing.
•
SHOCK HAZARD! Power supply uses double pole/neutral fusing.
•
Before working with live power systems, remove all metallic jewelry (such as watches, rings,
metal rimmed glasses, or necklaces) and wear safety glasses with side shields at all times
during the installation.
•
Motors and fans may start without warning.
•
Use insulated hand tools while working on live power systems.
For installation, setup, and user information, see the product documentation available on the Christie website.
Read all instructions before using or servicing this product.
1.
Access the documentation from the Christie website:
•
Go to this URL: http://bit.ly/2CqwJJO.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
Summary of Contents for FHD554-XZ-H
Page 1: ...FHD554 XZ H and FHD554 XZ HR Service Guide 020 001807 01 ...
Page 25: ......
Page 26: ......
