Replacement procedures
FHD554-XZ-H and FHD554-XZ-HR Service Guide
13
020-001807-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
The AD board is located on the bottom left-hand rear side of the display panel.
1.
Remove the rear cover.
2.
If present, remove the OPS module.
3.
Remove the two standoffs from the ports.
4.
Remove all connectors from the board.
5.
Remove the nine Phillips screws from the AD board.
6.
Replace the AD board.
7.
To re-install, follow these steps in reverse order.
The keypad board is located on the left-hand rear side of the display panel.
1.
Remove the rear cover.
2.
Remove all connectors from the board.
3.
Remove the two Phillips screws that secure the keypad board to the side of the display panel.
4.
Replace the keypad board.
5.
To re-install, follow these steps in reverse order.
Summary of Contents for FHD554-XZ-H
Page 1: ...FHD554 XZ H and FHD554 XZ HR Service Guide 020 001807 01 ...
Page 25: ......
Page 26: ......
