Maintenance and troubleshooting
FHD554-XZ-H and FHD554-XZ-HR Service Guide
19
020-001807-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
A progress bar appears when the update begins. During the update, do not start or exit any programs
on the computer, connect or disconnect any cables, or use the keypad or remote control for the
display panel. The update may take up to three minutes to complete.
15.
When the Results screen appears, disconnect the RS232 or network cable then click Exit.
16.
Restart the display panel.
17.
Repeat steps 5-15 for the NetUart firmware.
Default
Password or
PIN
Modified Password
Default ID or
Username
API Command to send
to unlock the Serial or
Ethernet connection
Reset
password to
factory default
Applicable
Firmware
Version
“panel serial
number”
Maximum 15
characters. Any
combination of alpha,
numeric, special
characters.
admin
N/A
Perform
factory reset
From initial
production
Learn about common issues and their solutions.
The FHD554-XZ-H-HR display panels do not require any routine maintenance. There are no user-serviceable
or replaceable parts. Do not attempt to repair or replace any system component yourself unless you are a
qualified, factory trained-technician, as doing so voids the product warranty.
No video is displayed on the panel.
Details
Possible causes for this issue include:
•
The display is not plugged in or the power outlet is not active.
•
The main power switch is off.
•
The remote control batteries have run out.
Resolution
•
Ensure that the display is plugged in and that the power outlet is active.
•
Set the main power switch to the on position.
•
Replace the batteries.
The display is on and the menus appear, but there is no picture on the panel.
Details
Summary of Contents for FHD554-XZ-H
Page 1: ...FHD554 XZ H and FHD554 XZ HR Service Guide 020 001807 01 ...
Page 25: ......
Page 26: ......
