For LSM1 for the 630-GS, 635-GS, 1075-GS models:
Orientation
Adjustment range (in turns) for boresight screws
A
B
C
Table top
3 + 3/4
7 + 1/2
8 + 1/2
Portrait (right)
5 + 1/4
4
10
Portrait (left)
5 + 1/4
9 + 1/2
4 + 1/2
Ceiling mount
7 + 1/4
6
6
Upright
7 + 1/2
7
7 + 1/4
For LSM2 A for the 630-GS, 635-GS, 1075-GS models:
Orientation
Adjustment range (in turns) for boresight screws (LSM 2 A)
A
B
C
Table top
7
7
7
Portrait (right)
8 + 1/2
5 + 1/2
8 + 1/2
Portrait (left)
8 + 1/2
8 + 1/2
5 + 1/4
Ceiling mount
11
5 + 1/2
6 + 1/2
Upright
9 + 1/2
7
7
For LSM2 B for the 880-GS, 1100-GS, 1400-GS models:
Orientation
Adjustment range (in turns) for boresight screws (LSM 2 B)
A
B
C
Table top
3
3
3
Portrait (right)
5
2
5
Portrait (left)
5 + 1/4
5 + 1/4
2
Ceiling mount
7 + 1/2
2
3
Upright
5 + 1/2
3
3
Installing the ultra short throw lens
Install the ultra short throw lens in the projector after installing the new boresight adapter.
1. Insert the ultra short throw lens into the projector slightly angled to the left so the Top label on
the lens aligns with the Status LED indicator on the projector.
Note the orientation of the lens (1) as illustrated below.
2. To lock the lens, rotate the lens clockwise (2 in the image below).
Ultra short throw lens installation
Ultra Short Throw Lens Installation Instruction Sheet
16
020-102569-07 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
