Screen size
Diagonal
(inches)
W (cm)
H (cm)
P (cm)
A-P
(cm)
L (cm)
B (cm)
C (cm)
M (cm)
230
495.4
309.6
19.9
120.4
82.6
94.2
176.8
275.2
240
516.9
323.1
19.9
126.1
82.6
101.5
184.1
287.6
250
538.5
336.5
19.9
131.7
82.6
108.8
191.5
300.0
260
560.0
350.0
19.9
137.4
82.6
116.2
198.8
312.4
270
581.6
363.5
19.9
143.0
82.6
123.5
206.1
324.8
280
603.1
376.9
19.9
148.7
82.6
130.8
213.4
337.2
290
624.6
390.4
19.9
154.4
82.6
138.1
220.8
349.6
300
646.2
403.9
19.9
160.0
82.6
145.5
228.1
361.9
310
667.7
417.3
19.9
165.7
82.6
152.8
235.4
374.3
320
689.3
430.8
19.9
171.3
82.6
160.1
242.7
386.7
330
710.8
444.2
19.9
177.0
82.6
167.4
250.0
399.1
340
732.3
457.7
19.9
182.6
82.6
174.7
257.4
411.5
350
753.9
471.2
19.9
188.3
82.6
182.1
264.7
423.9
400
861.6
538.5
19.9
216.5
82.6
218.7
301.3
485.8
Turning on the projector
Before turning on the projector, ensure the ultra short throw lens has been installed.
1. Plug the projector into AC power.
2. To turn on the projector, select the Power button.
Adjusting the boresight
The boresight adjustment range changes depending on the orientation of the projector.
When adjusting the boresight with the internal test pattern, only limited lens shift can be performed
and source input is not allowed.
1. Note the location of each the boresight screw before continuing with this procedure.
Ultra short throw lens installation
Ultra Short Throw Lens Installation Instruction Sheet
19
020-102569-07 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
