•
Remove the four securing the boresight adatpter plate 2 (LSM2).
3. Rotate the standard boresight adapter and remove from the projector.
When removing the boresight adapter, make sure it does not scratch the aperture casing of the
projector.
4. Retain the standard boresight adapter for future use.
Ultra short throw lens installation
Ultra Short Throw Lens Installation Instruction Sheet
6
020-102569-07 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
