background image

Caution! If not avoided, the following could result in minor or moderate injury.

ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.

Only Christie qualified technicians are authorized to use the tools provided in the toolbox.

AC power precautions

Read all safety and warning guidelines before connecting to AC power.

Warning! If not avoided, the following could result in death or serious injury.

SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.

FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.

SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.

SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.

SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.

Install the product near an easily accessible AC receptacle.

Caution! If not avoided, the following could result in minor or moderate injury.

FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

SHOCK HAZARD! Power supply uses double pole/neutral fusing.

Laser safety precautions

Read all safety and warning guidelines before operating the projector laser.

Warning! If not avoided, the following could result in death or serious injury.

PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. Class 1 Laser Product - Risk Group 3 according to IEC 60825-1:2014 and IEC
62471-5:2015.

LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the laser module.

Possible hazardous optical radiation emitted from this product. (Risk group 3)

Only Christie qualified technicians who are knowledgeable about the hazards associated with
laser use, high-voltage, and high temperatures generated by the product are authorized to
assemble, install, and service the Christie Laser Projection System.

Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.

Do not operate the product without all of its covers in place.

Introduction

4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB

8

020-102961-03 Rev. 1 (08-2019)

Copyright 

©

 2019 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for D4K40-RGB























































Reviews: