HS Series D16-20 User Manual
60
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Configuring light
settings
Learn how to configure the light settings.
Setting light source mode
Set up light source mode depending the environment.
1. Select Menu > Light Source > Light Source Mode.
2. Select appropriate light source mode:
• Constant Power—Set the projector’s power level to meet individual installation
requirements. Power levels can be managed to obtain the brightest picture or longest
light source life.
• Constant Intensity—After setting the value in Constant Power, select Constant
Intensity to maintain current constant brightness and color settings. This function can
remain at current setting for longer period of time than Constant Power mode.
Note:
• Light sensor calibration must be performed before enabling Constant Intensity.
• This mode is used for long term projecting or blending purpose.
• When Constant Intensity is enabled, Dynamic Black and Real Black functions are
automatically disabled.
• When Picture Settings is changed under Constant Intensity, light source mode
automatically changes back to Constant Power.
• ECO 1—Set the projector to 80% constant brightness and color settings.
• ECO 2—Set the projector to 50% constant brightness and color settings.
• Rental Mode—Remain at 80% constant brightness and color settings. Light sensor
calibration must be performed before enable Rental Mode.
3. Press ENTER.