Configuring system settings
HS Series D16-20 User Manual
47
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Adjusting on-screen display menus
Adjust various on-screen display (OSD) settings including the position, OSD transparency and
timing for OSD to disappear.
Determining the on-screen display position
Adjust the location of the on-screen display (OSD) menus.
1. Select MENU > Configuration > Menu Preferences > Menu Horz Offset or Menu Vert
Offset.
2. To determine the location on the screen where you want OSD to appear, adjust the slider by
arrow keys or press ENTER to input the value.
3. After inputting the value, press ENTER to apply.
Setting the transparency of the on-screen display position
Change the on-screen display (OSD) menus background to be transparent. As the value increases,
more of the image behind the menu is visible.
1. Select MENU > Configuration > Menu Preferences > Menu Transparency.
2. Adjust the slider by arrow keys or press ENTER to input the value.
3. After inputting the value, press ENTER to apply.
Setting time out for on-screen display
Adjust the time for on-screen display to disappear.
1. Select Menu > Configuration > Menu Preferences > Menu Time Out.
2. Select the appropriate time:
• Off
• 1 Min
• 3 Min
3. Press ENTER.
Showing Messages
Enable or disable the on screen message dialogs. For example, input source, IP Address, Slot
information, Gamma information, and so on.
1. Select Menu > Configuration > Menu Preferences > Show Messages.
2. To swap, press ENTER.