Operation
Learn how to operate the projector.
Turning the projector on
Learn how to turn the projector on.
1. Turn on the circuit breaker for the projector.
2. Press and hold the Power icon.
3. To ignite the lamp, press and hold the Light Bulb icon.
Turning the projector off
Learn how to turn the projector off.
1. Press and hold the Light Bulb icon to turn the lamp off.
Perform this step if you want the light source off but to keep the projector powered on.
Otherwise, proceed directly to step 2.
2. Press and hold the Power icon.
The projector enters a cool-down mode and the fans and electronics stay on for 10 minutes.
After this cool-down period, the projector enters Standby mode.
Projector states
Learn what occurs when you press the Power and Lamp icons and the tail light status.
Button pressed
Projector's current state
—
Enters Standby
power mode
(Flashing green on
the tail light)
Power is on and the
lamp is off
(Solid green on the
tail light)
Power is on and the
lamp is on
(Solid green on the
tail light)
Cool-down mode
(Yellow/green
flashing on the tail
light)
Power On
Powers on to full
power (boot delay)
No action
No action
Cancels cool down
and goes to full
power
Power Off
No action
Powers off
immediately
Turns the lamp off
immediately; enter
cool-down mode
No action
Lamp On
Power is on and
turns on the lamp
(boot delay)
Immediately turns on
the lamp
No action
Cancels cool down
and immediately
turns on the lamp
CP2415-Xe Installation and Setup Guide
30
020-103584-02 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CP2415-Xe
Page 1: ...Installation and Setup Guide 020 103584 02 CP2415 Xe...
Page 48: ......
