CP2420-RGB
Hazard
distance
(m)
Throw ratio
High brightness and ultra high contrast lenses
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
•
The projection room shall be clearly identified by the posting of laser warning and restricted
access signs, and by restricting entry through physical means. The projection room sign must
display the warning "No direct exposure to beam shall be permitted".
•
The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to [email protected]. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
•
Certain US states have additional laser regulatory requirements. Contact
[email protected] for additional regulatory requirements.
Introduction
Cinema 2K-RGB Installation and Setup Guide–CP2415-RGB and CP2420-RGB
11
020-103259-01 Rev. 1 (10-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
