a) In the right toolbar, select Test Patterns.
b) Select the RGB-2K-Boresight pattern and display it full screen.
2. Focus the image on cross-hair image I.
3. Evaluate the focus on cross-hair image II and III.
•
If all three images are in focus, no further action is required.
•
If boresight is required, continue to step 4.
The adjustment screws (A) on the lens mount affects the corresponding cross-hairs on the test
pattern.
4. To loosen the three setscrews (B) on the lens mount, use a 5 mm hex driver.
The setscrews must be backed out several turns to avoid contact with the inner lens mount
plate.
Adjusting the image
Cinema 2K-RGB Installation and Setup Guide–CP2415-RGB and CP2420-RGB
46
020-103259-01 Rev. 1 (10-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
