5. To fine tune the focus of cross-hair pattern I, adjust the appropriate adjustment screw (A)
until the cross-hair image is in focus with minimal flare.
6. To fine tune cross-hair pattern II, adjust the appropriate adjustment screw until the cross-hair
image is in focus with minimal flare.
7. To fine tune cross-hair pattern III, adjust the appropriate adjustment screw until the cross-
hair image is in focus with minimal flare.
8. Repeat step 5 to 7 as required until all three cross-hair patterns are in equal sharp focus.
•
If the boresight is acceptable, proceed with step 11.
•
If the boresight does not appear to be converging to an acceptable level of image quality,
or if the lens does not focus over the correct range of throw distances, proceed with step
9.
Adjusting the image
Cinema 2K-RGB Installation and Setup Guide–CP2415-RGB and CP2420-RGB
47
020-103259-01 Rev. 1 (10-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
