background image

7. Tap Ingest.
8. To view the ingest progress, tap the Progress tab.

Canceling an ingest

Cancel an ingest if the ingest is taking too long, or if the content has been ingested previously.

1. Through the Content Manager, run an operation to ingest content and keys. See Ingesting

content and keys (on page 30).

2. Tap the Progress tab.
3. Select the checkbox to the left of the content.
4. Tap Cancel.

Viewing remaining NAS storage capacity

View the remaining NAS storage capacity to determine if additional storage is required.

1. In the left navigation menu, tap Content Manager.
2. Review the remaining storage capacity displayed on the Local Content tab.

Filtering content by type

Filter content by type to locate content of a specific type or reduce the return results.

1. In the left navigation menu, tap Content Manager.
2. On the Local Content tab in the Show list, select the content type.

Viewing available keys

Keys are required to play encrypted content.

1. In the left navigation menu, tap Content Manager.
2. To view the available keys, tap the Keys tab.

Filtering the key list

Filter the key list to locate keys of a specific type.

1. In the left navigation menu, tap Content Manager.
2. Tap the Keys tab.
3. In the Show list, select one of the following options for filtering the list:

All Keys

Not Yet Valid

Valid

Managing content

CP2308-G User Guide

31

020-102863-01 Rev. 1 (05-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2308-G



































































































Reviews: