background image

SST–System Status

Retrieves the various system status groups.
To retrieve a single item, include the item index number (

SST+

SUBCODE

?

yy) where yy is the index

number of the item. The response to each command is a single message for each item, with the
format:

(SST+

SUBCODE

!

yyy zzz

 "Status Text" "Status Description")

where

yyy is the item index number

zzz is the alert condition (0=Unknown, 1=OK, 2=Warning, 3=Critical Error, 4=Sensor Failure)

Parameters

Access level: None

Power level (minimum): Power Down

Commands

Command

Description

Values

SST?

Returns information on all status groups, with one message
per item. (Read-only)

Where parameters are:

P1 = Index number

P2 = Error level

P3 = Value

P4 = Description

Error level is:

001 = No errors or warnings

002 = Warning

003 = Critical error

SST+ALRM?

Returns a summary of any active alarms. (Read-only)

SST+COOL?

Returns cooling data—cooling fans, air flow, and so on.
(Read-only)

SST+INTE?

Returns interlock data. (Read-only)

SST+LAMP?

Returns lamp operational data. (Read-only)

SST+LENS?

Returns lens data. (Read-only)

SST+NTWK?

Returns network configuration. (Read-only)

SST+SECU?

Returns security data. (Read-only)

SST+SERI?

Returns serial numbers. (Read-only)

SST+SYST?

Returns system data—power, hours of use, shutter open, and
so on. (Read-only)

SST+TEMP?

Returns temperature data. (Read-only)

SST+VERS?

Returns version numbers. (Read-only)

SST+VIDO?

Returns video related data. (Read-only)

Examples

Return the projector status:

(SST+ALRM?)

C

 serial commands

C Technical Reference–Serial Commands

26

020-103075-05 Rev. 1 (09-2022)

Copyright 

©

 2022 Christie Digital Systems USA, Inc. All rights reserved.

If printed, please recycle this document after use.

Summary of Contents for CineLife+ 4 Series

































Reviews: