Command
Description
Values
LPF+CHAN? "<channel>"
Returns the lamp file used by a specified
channel. (Read-only)
channel = The name of a specific
channel
LPF+CHAN "<channel>"
"<lamp file>"
Sets the lamp file for a specified channel.
channel = The name of a specific
channel
lamp file = Subject to the range
returned in LPF?L
Examples
Return the lamp file in use by the active channel:
(LPF?)
Result:
(LPF! "Default3D")
Return a list of all available lamp files:
(LPF?L)
Result:
(LPF!L001 001 000 "Default")
(LPF!L001 001 001 "Default3D")
...
Set the lamp file at index 1 for the active channel:
(LPF 1)
Set the lamp file Default for the active channel:
(LPF "Default")
Return the lamp file used by the specified channel:
(LPF+CHAN? "Media Block Flat")
Result:
(LPF+CHAN! "Default")
Set the lamp file at index 1 to the specified channel:
(LPF+CHAN "Media Block Flat" 1)
Set the lamp file Default to the specified channel:
(LPF+CHAN "Media Block Flat" "Default")
Return a list of all available lamp files for a C laser projector:
(LPF?L)
(LPF!L001 001 000 "100Percent")
(LPF!L001 001 001 "2270_75")
(LPF!L001 001 002 "2270_80")
(LPF!L001 001 003 "2270_90")
(LPF!L001 001 004 "BHavana_temp")
(LPF!L001 001 005 "Bhavana_Laser_File")
C
™
serial commands
C Technical Reference–Serial Commands
18
020-103075-05 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CineLife+ 4 Series
Page 1: ...Technical Reference 020 103075 05 CineLife Serial Commands...
Page 32: ......
