CHA–Channel
Selects the channel configuration.
Parameters
•
Access level: Operator
•
Power level (minimum): Power Up
Commands
Command
Description
Values
CHA?
Returns the active channel name. (Read-only)
—
CHA?L
Returns a list of available channels. (Read-only)
—
CHA "<value>" Sets the channel configuration.
value = "Channel name"
Send (CHA?L) to see a list of available
channels and then use this command to set
the channel configuration.
Examples
Return the active channel name:
(CHA?)
Result:
(CHA! "Media Block Flat")
Set the channel to Media Block Flat:
(CHA "Media Block Flat")
FCS–Focus Lens Position Adjustment
Adjusts the lens to a specific focus position with a specified direction.
In most cases the active lens file is the one specified by the current channel. If a user selects a
different lens file in the user interface ILS File Setup panel, the selected lens file becomes active. That
file may be different than the one specified by the current channel.
Parameters
•
Access level: Operator
•
Power level (minimum): Power Up
C
™
serial commands
C Technical Reference–Serial Commands
10
020-103075-05 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CineLife+ 4 Series
Page 1: ...Technical Reference 020 103075 05 CineLife Serial Commands...
Page 32: ......
