manualshive.com logo in svg

Christie ACT, User Manual

Share
Download
Christie ACT User Manual Download Page 60

4-2

Christie ACT User Manual

020-100129-05 Rev. 1 (02-2010)

Section 4: Maintenance

4.1 Safety Warnings and Guidelines

4.1.1 Labels and Markings

Observe and follow any warnings and instructions marked on the Christie 

ACT

.

The exclamation point within the equilateral triangle indicates related operating/
maintenance instructions in the documentation accompanying Christie 

ACT

.

 
The lightning flash and arrowhead symbol within the equilateral triangle indicates non-
insulated “dangerous voltage” within Christie 

ACT’s

 enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock.

4.1.2 General Precautions

Always follow the precautions and warnings provided with your projector - for example, consult 

the 

projector User Manual 

for all warnings pertaining to the use of that projector. Be aware of the 

following general precautions in all installations: 

 

1) Position all cables where they cannot contact hot surfaces or be 

pulled or tripped over. 2) Do not open the Christie 

ACT

. There are no serviceable parts 

within the Christie 

ACT

.

Christie 

ACT

 must be installed in an environment that meets the operating range specifications in 

Section 6 Specifications

. 

4.1.3 AC Power Precautions

 

1) Do not attempt operation if the AC supply is not within the specified 

voltage range. 2) Only Qualified Electricians should connect primary voltages.

• Do not allow anything to rest on the power cords. Locate the projector where cords cannot be abused 

by persons walking on it or objects rolling over it. Never operate Christie 

ACT

 if the power cable 

appears damaged in any way.

• Do not overload power outlets and extension cords as this can result in fire or shock hazards.
• Only qualified service technicians are permitted to open any enclosure on the product, and only if 

AC has been fully disconnected from the product.

4.1.4 Power Cords and Attachments

 

1) The North American rated line cord is provided with each unit. Ensure 

that you are using a line cord, socket and power plug that meets the appropriate local 

rating standards. 2) Use only an AC power cord recommended by Christie. Do not 

attempt operation if the AC supply and cord are not within the specified voltage and 

power range.

Use only the attachments and/or accessories recommended by Christie. Use of others may result in the 
risk of fire, shock or personal injury.

Summary of Contents for ACT











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands