manualshive.com logo in svg

Christie ACT, User Manual

Share
Download
Christie ACT User Manual Download Page 20

2-6

Christie ACT User Manual

020-100129-05 Rev. 1 (02-2010)

Section 2: Installation & Setup

2.4.5 GPIO

The 9-pin GPIO male connector is located on the back panel of the 

Christie

 

ACT. 

Refer to . It provides a 

flexible method of interfacing a wide range of external input and output devices to Christie 

ACT

, often so that 

an event on one device automatically triggers an event on the other. The GPIO pins 2 to 4 and pins 6 to 9 are 
for general purpose which are configured for input or output. Refer to the 

 Config: Communication Tab, on 

page 3-17

.

 

Each GPIO pin can be set to input or output but is not isolated. Power provided is 12V, which is 

rated for 200 mA. Refer to 

Section 6 Specifications

 for more information.

GPIO Features

• Configurable inputs/outputs for signalling between devices.
• Easy integration within an established control system. 
• Ability to trigger user configurable script/actions on input events.

 Figure 2-8 Rules for Opto-Inputs

 Figure 2-9 GPIO

Pin 1

Pin 9

Summary of Contents for ACT











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands