Christie 130-002103-01, User Manual

Page: 120 / 144

108 Matrix StIM™ WQ/SIM WQ User Manual 
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Network Setup (NET)
NET
CONTROL GROUP:
Config/Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Admin
Description
Set or request the network setup for this device.
Subcode
DOMA Description of Use
Set the domain name
ETH0 Set the IP address for the first ethernet controller.
GATE Set the network gateway.
HOST Set the host name.
MAC0 Gets the MAC address of the first ethernet controller.
PORT Set the PORT number.
SUB0 Set the network subnet mask for the first ethernet controller.
Examples:
(NET+ETH0 "192.168.1.35") Set new IP address on the first ethernet controller.
(NET+GATE "192.168.0.1") Set the gateway.
(NET+SUB0 "255.255.255.0") Set the subnet mask on the first ethernet controller.
(NET+HOST "MyHostName") Set the host name.
(NET+DOMA "MyDomainName") Set the domain name.
(NET+ETH0 ?) Get IP address from first controller. (NET+ETH0! "192.168.1.35").
(NET+ETH1 ?) Get IP address from second controller. (NET+ETH1! "192.168.1.36").
(NET+MAC0 ?) Get MAC address from first controller. (NET+MAC0! "00:12:3F:7B:76:B4").
(NET+GATE ?) Get default gateway. (NET+GATE! "192.168.0.1").
(NET+PORT 3002) Set the Port number.
(NET+PORT ?) Get the Port number. (NET+PORT! 3002).