Christie 130-002103-01, User Manual

Page: 132 / 144

120 Matrix StIM™ WQ/SIM WQ User Manual 
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Time/Date (TMD)
Test Pattern Enable (TPE)
Examples:
(TCS+SLCT 1) Select EBU color gamut as target.

(TCS+RDCX 290) Set current Target gamut red x point to 0.290. 
(TCS+BLEY ?) Return value of EBU preset blue y point. 
(TCS+COPY 3) Copy settings from HD Video to current.
TMD
CONTROL GROUP:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Admin
Description
Set the date, time or time zone.
Subcode
DATE Description of Use
Set the date in the form yyyy/mm/dd.
TIME Set the local time in the form hh:mm:ss
NOTE: Time must be set using a 24-hour clock (regardless of
LOC+TIME setting).
Examples: 
(TMD+TIME "17:50:45") Set new local time. 
(TMD+DATE "2007/02/30") Set the local date. 
(TMD+TIME?) Get local time (TMD+TIME! 17:50:45).
TPE
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Automatically select White test pattern based on the control being adjusted. Certain controls that deal with color
settings will enable a white test pattern when entering WebUI menus and disable when exiting the menu. This
control defines whether this happens. There are some situations where the user may not want to automatically
go to a white test pattern when the WebUI menu is selected, for example if they have specific content that they
wish to evaluate.
0 = Disable automatic test patterne
1 = Enable automatic test pattern
Subcode
<No Subcode> Description of Use
Examples:
(TPE 0) Disable test pattern.
(TPE ?) Report state of test pattern enable.
TCS