94 Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Base Gamma Slope (BGS)
Broadcast Key Mode (BKY)
BGS
CONTROL GROUP:
Input
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Defines the slope to be used for the base custom Gamma table in the small linear section at the bottom of the
curve. This slope can be used to bring the low level blacks in the image in or out. This slope, combined with the
Gamma function, defines the custom Gamma table.
The valid range is 50-200, where 50 is a slope of 0.5 and 200 is a slope of 2.00.
Subcode
MAIN
Description of Use
Set the base gamma curve for main video
.
SECD
Set the base gamma curve for video
.
Examples:
(BGS 100) Set the base gamma slope to 1.0 for main video.
(BGS+MAIN 200) Set the base gamma slope to 2.0 for main video.
BKY
CONTROL GROUP:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Operator
Description
Toggle Broadcast Key Mode to select whether all key presses received by the projector will be relayed to all other
projectors on the network.
Subcode
<No Subcode >
DESCRIPTION OF USE
Set to 1 to enable.
Examples:
(BKY 1) Enable Broadcast Key.
(BKY 0) Disable Broadcast Key.
(BKY?) Get current Broadcast key state.
Summary of Contents for 130-002103-01
