1–2
Chris-Craft
Introduction
The Owner’s Manual
This manual is written to meet the recommendations of
Technical Information Report T-24, Owner’s
Manuals
, published by the American Boat and Yacht Council (ABYC) and the International Standard
ISO
10240: Small Craft – Owner’s Manual
.
In the United States, the American Boat and Yacht Council is a marine industry-based standards organiza-
tion that publishes Standards and Recommended Practices for Small Craft. The book is an extensive col-
lection of construction and design standards for small craft that is used as a guide by boat builders
throughout the world. For more information contact:
American Boat & Yacht Council
3069 Solomon's Island Rd.
Edgewater, MD 21037-1416
Ph (410) 956-1050 Fax (410) 956-2737
This manual is compiled to aid in the operation of the Chris-Craft line of boats in a safe and enjoyable
manner. It contains information on the systems, equipment operation, and general maintenance on each
model of boat. Many of the systems in the Chris-Craft line are similar among the various models, where
differences do occur, they will be pointed out and explained.
This manual provides up-to-date information on various systems at the time this vessel was manufactured.
Specifications of engines and other components are all subject to change without notice. The data con-
tained herein is subservient to the manufacturers’ manuals of the numerous components, installed in this
vessel. If a discrepancy exists between this manual and the component manual, the component manual
takes precedence.
This owner’s manual is not a course on boating safety or seamanship. If this is your first craft, or if you are
changing to a type of craft you are not familiar with, for your own comfort and safety, please ensure that
you obtain handling and operating experience before assuming command of the craft.
Always use trained and competent people for maintenance, repair, or modifications. The boat builder can-
not be held responsible for modifications he has not approved.
Any craft, no matter how strong it may be, can be severely damaged if not used properly. This is not com-
patible with safe boating. Always adjust the speed and direction of the craft to the sea conditions. Ensure
that the anticipated wind and sea conditions corresponds to the design category of your craft, and that you
and your crew are able to handle the craft in these conditions.
All persons should wear suitable buoyancy aid (life jacket/personal flotation device) when operating your
boat.
It is incumbent upon the owner/operator to stay informed of any changes and/or modifi-
cations that affect any component of this vessel and/or the safety of the vessel.
KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW
OWNER WHEN YOU SELL THE CRAFT.
Summary of Contents for Corsair 25
