5
CHANGING THE SHOULDER STRAP HEIGHT
Step 1.
Adjust the height of the shoulder straps, press the harness adjuster lever and pull
both harness straps forward to create slack. –
fig. 3-1
.
Step 2.
From the back of the seat, unhitch the harness straps from the harness connector
and pull the straps through to the front of the seat. Untie the shoulder pad connector and pull
these through to the front of the seat – f
ig. 3-2
.
Step 3.
Then from the front of the seat, pull it through the slot in the seat’s backrest and
fabric cover. Thread the harness strap back through the next hole up or down on the seat’s
backrest –
fig. 3-3
.
Step 4.
Re-thread the harness strap back onto the harness connector at the back of the
seat. At the same time, re-thread the shoulder pad belt back onto the shoulder pad connector
at the back of the seat –
fig. 3-4
.
Repeat the same process for the other harness strap. Make sure both of the straps go
through slots at the same height and do not become twisted.
Do not use the top two slots in the backrest. These are for the seat belt lock only.
fig. 3
1
2
3
4
