8
Only use for group I (9-18 kg)
IMPORTANT:
Using the 5 point harness system, including the shoulder straps, crotch strap
and lap strap.
Step 1.
Place the child safety seat on the vehicle’s seat ensuring it is firmly pressed against
the car seat backrest.
Step 2.
Feed the diagonal belt and the lap belt through the opening of the side shell.
Step 3.
Pull and feed the diagonal belt and lap belt out through the opposite opening. Then
fasten the two belts into the seat belt buckle of the vehicle.
Step 4.
Pull and tighten the two belts in the direction of arrow symbols
(same as fig.9)
and
fix the two belts together with the lock-off.
Step 5.
Now you can place your child into the safety system. Check the height of the shoul-
der straps on the correct position.
Make sure the seat belt has not become twisted. Also check that the cover is not impeding
the movement or fit of the seat belt webbing in any way. To release your child seat follow the
above instructions in reverse order.
fig. 9
CAR SEAT COVER REMOVAL
To remove the child restraint cover, please do the same operation as described in Chang-
ing the shoulder strap height. Release the crotch harness, slide it through the strap slot in the
cover. Remove the cover.
Do not use this car seat without upholstery! It is an integral part of the car seat and can’t be
replaced except with an original one supplied by the manufacturer.
1
2
3
4
5
6