FITTING THE CAR SEAT WITH THE 3 POINT LAP AND
DIAGONAL SEAT BELT.
7
Only Use For Group 0+ (Less Than 13 Kg)
Notice:
When rearward facing, you have to open the Foot and pull up the red lever handle
and hold it, at the same time pull the seat body in to the sleeping position, then release the red
lever, and push it until you hear a clear click sound –
fig. 7
.
IMPORTANT!
Using the 5 point harness system, including the shoulder straps, crotch strap
and lap strap.
Step 1.
Adjust the foot of car seat to the front, and adjust the car seat to the most angle of
inclination. Place the back of car seat into the car seat.
Step 2.
Through the bellyband to the front of car seat. The shoulder of car seat around the
past from the back.
Step 3.
Feed the lap belt through belt guidance under the base of car seat. Pull and feed
the diagonal belt through the belt and the blue belt guidance behind the backrest of the car
seat. Pull and tighten the two belts in the direction of arrow symbols
(same as fig.8)
. Fix the
two belts together with the lock-off
(same as fig.8)
.
Step.4
Now you can place your child into the safety seat. Check the height of the shoulder
straps on the correct position.
Make sure the seat belt has not become twisted. Also check that the cover is not impeding
the movement or fit of the seat belt webbing in any way.
To release your child seat follow the above instructions in reverse order.
ATTENTION!
Only the most Angle of inclination is fit for group 0+.
fig. 8
fig. 7
1
2
3
4
5
