Chipkin™
VeederRoot® Gateway User Manual
3381 Cambie Street, #211
© 2018 Chipkin Automation Systems
Vancouver, BC, Canada, V5Z 4R3
All rights reserved
1-866-383-1657
Page 10 of 67
2.
OVERVIEW
SYSTEM OVERVIEW
The CAS 2700-02 VeederRoot® Gateway is a protocol converter that converts data from one
protocol and makes it available to devices that support a different protocol. The gateway typically
sends polling messages, extracts any data values, and stores the values in an internal database. The
data is then made available via other protocol specific formats.
For this device, the gateway polls for data using the VeederRoot® TLS protocol over serial or TCP/IP.
The data is then served via Modbus (TCP or RTU), BACnet IP, or HTTP. All of these options are
available simultaneously.
OPTIONAL EXPANSION MODULES
The CAS 2700-02 VeederRoot® Gateway does not have any optional expansion modules.
INSTALLATION AND CONFIGURATION SUMMARY
For more information on how to install and setup the
CAS 2700-02 VeederRoot® Gateway please
refer to the Getting Started with CAS Gateway.pdf document. For instructions on configuring this
device, please refer to the
Configuration and Settings Section
of this document. Configuration of the
device is completed primarily through a web interface.
DEVICE WIRING REQUIREMENTS
For more information on how to wire up the CAS 2700-02 VeederRoot® Gateway, please refer to the
of this document.
contains wiring pictures and
diagrams as well as port pin-outs.
