16
Top view of container pedestal (Container front)
Figure 3-4 Cable entries of the container
Function of each opening is shown below:
Item
Name
Description
Hole-1 DC cable inlet
DC cables connect to the inverter DC side through this
hole
Hole-2 AC cable outlet
AC cables connect to the downstream transformer
through this hole
Hole-3
External power supply cable
inlet
External power supply cables go inside the container
through this hole
Hole-4 Communication cable inlet
Communication cables go inside the container through
this hole
3.1.6 Flashings Design
Flashings should be installed to all the 5 air outlets on the left, back and right of the container.
Under the flashings are anti-dust filters.
The design and installation of the flashings can greatly reduce the effect of rain and wind and sand
to the ventilation ducts.
Remove the cover plates and install the corresponding flashings after the container has been
secured to the ground. The position of 5 cover plates is shown in the following figure by (1) – (5).
Danger
Danger
1MW
PV Power Station
Shanghai Chint Power Systems Co.,Ltd
Danger
Danger
Left view Back view Right view
Figure 3-5 Position of the cover plates
