ARTIPRESS
19
seconds of waiting, it returns to the screen in Fig.18 if it had been selected in the
user memory or screen of Fig.19 if you selected the smart-card.
If you want to save the customized program on the smart-card but the smart-card
isn’t correctly inserted in its slot, pressing the function taste relative to the SAVE
button will appear a WARNING message in which it indicates that the Smart-Card
is mot inserted.
L
L
O
O
A
A
D
D
P
P
R
R
O
O
G
G
R
R
A
A
M
M
S
S
Pressing the button corresponding to the LOAD PROGRAM function (see fig. 5) he
following screenshot is displayed:
Fig.25
You can choose :
-
one of the pre-set therapy programs stored in the unit’s memory , (these
programs cannot be changed or deleted)
-
or from the personalized programs, created with the function "Create
program", stored in the user memory;
To choose such programs, press the button USER PROGRAM; it appears a
screenshot showing all the programs stored in the user memory.
-
or from the personalized programs, created with the function "Create
program", stored in the Smart-Card;
To choose such programs, press the button SMART-CARD PROGRAM; it appears
a screenshot showing all the programs stored in the Samrt-Card.
In case of unsuccessful reading of the smart-card (due to a non insertion or to a non
correct insertion of the smart-card in the dedicated slot), pushing the PROGR.
SMART-CARD button will appear a WARNING message which indicates that the
smart-card is not inserted.
The stored programs reflect the fruit of many years experience supporting expert
professional operators.
Appendix C
shows a list of the programs available.
Once the program is selected from the memory support desired (for example,
choosing "test"), pressing the Encoder knob, the following picture will be displayed:
Fig.26
In this screenshot it is possible to:
-
change the length of the treatment, changing the parameter TIME
-
change the length of the pause between the swelling of a sector and the
successive one, changing the parameter PAUSE
-
adjust the chambers pressure, pressing the button corresponding to the
MODIFY PRESSURE function.
-
start the deflation of the chambers once the treatment has finished, by
pressing the button corresponding to the DEFLATING function
Pressing the EXIT button, the operation of program upload is cancelled and you
return to the list of programs of the user memory, if the user memory was selected
for the loading of the customized program. Otherwise, you return to the list of
programs of the Smart-Card, if the Smart-Card was selected for the loading of the
customized program.
Progr. Utente
Esci
Progr. Standard
Progr. Smart-card
Phases
Exit
Modify pressure
Select Kitpoint
