ARTIPRESS
17
For to assign a name to the program , please follow these instructions :
1.
rotate the encoder knob until to position the cursor on the program name
menu, then press the encoder knob; it appears the next screen:
Fig.20
2.
rotate the encoder knob until to position the cursor on the character to
modify , then press again the encoder knob ; the cursor modifies shape:
Fig.21
3.
Now the character selected is modifiable (clockwise for increasing values,
anticlockwise for decreasing values ) until the desired character
4.
Press the encoder knob for to confirm the insertion of the selected character
Repeat the steps from 2 to 4 for every of the characters to insert , until to end the
typing operation
5.
press the function taste relative to the OK button .
For example, when writing the name “test” for the new program , the following
screenshot will be displayed (see fig.22:
Fig. 22
Pressing the OK button to confirm the inserted name, the following screenshot will
be displayed:
Fig. 23
In this screenshot it is possible to :
-
choose the accessory to use for the treatment among those available (GC9,
BC5, BC7), pressing in succession the button corresponding to the
SELECT KIT POINT function
Ok
Ok
Ok
Phases
Exit
Modify pressure
Select Kitpoint
