ARTIPRESS
15
Fig. 14
Fig. 15
To adjust the pressure value of a generic sector:
-
turn the encoder knob until the cursor is located on the sector to adjust
-
press the encoder knob in correspondence with the sector selected the value
of pressure associated to the sector chosen will be highlighted, and will
therefore be modifiable
-
turn the encoder knob (clockwise for increasing values, anticlockwise for
decreasing values ) until the desired pressure value for each sector selected
-
press the encoder knob to confirm the pressure value selected and exit the
modification routine
Repeat the operation for all the sectors in order to modify the default pressure
values.
Pressing the button corresponding to the GLOBAL function (see fig.15), the
following screenshot is displayed:
Fig. 16
in which all the sectors are adjusted at the same pressure.
Turning the encoder knob (clockwise for increasing values, anticlockwise for
decreasing values ) the pressure value is contemporarily modified in all sectors
To exit the modification routine, press gain the button corresponding to the
GLOBAL function.
Pressing the EXIT button the operator is redirected to the screenshot of fig.14.
C
C
R
R
E
E
A
A
T
T
E
E
P
P
R
R
O
O
G
G
R
R
A
A
M
M
S
S
This function is available only with the user memory and with the smart-card, that
are the memory supports available to save new programs.
In such memory supports it is possible to save a personalized program from an
already existing program belonging to the inner memory of the device, or to save a
program created "ex-novo".
Pressing the button corresponding to the CREATE PROGRAM function (see fig.5),
it appears the screen of fig.17
The pic. 17 shows that the memory support selected to create a program is the user
memory (as the frame around the USER PROGRAM button shows) and that within
it there are no stored programs.
Modify pressure
Deflating
Preview
Exit
Global
Exit
Global
Exit
