background image

16

             

HOW TO CARE FOR YOUR CHILDCARE BASSINET

Cleaning

Maintenance

This product has been designed and developed with safety, comfort and functionality 

in mind. Please take the time to read this manual carefully before using this product 

and keep it in a safe place for future reference. 

To ensure the long-lasting use of your bassinet, dry it with a soft absorbent cloth after 

use. Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to 

dry completely before folding or storing it away. Do not dry clean, or use bleach on 

fabrics or trims. Do not machine wash, tumble or spin dry, unless the care labelling 

on the product permits these methods. For washing fabric, carefully comply with the 

instructions indicated on the label.

Always check parts regularly for tightness of screws, nuts and other 

fasteners – tighten or replace if required. On a regular basis check the 

condition of the product and the presence of any possible damage. In 

the case of damage do not use and keep out of reach of children. To 

maintain the safety of your bassinet, seek prompt repairs for bent, torn, 

worn or broken parts. Use only those parts and accessories approved by 

CNP Brands

If you have any difficulties in assembling the bassinet, please contact our 

Service Department. 

In Australia, contact

 CNP Brands on 1300 667 137

, in New Zealand 

contact 

Wainhouse Distribution on 0800 567 5000.

Summary of Contents for Chloe



















Reviews: